FAQs

Please check the followings:

1. Press the monitor's OSD control keys or 5-way controller and check the Input
    options to see if DisplayPort is selectable. If DisplayPort is not selectable,
    please ensure the DisplayPort cable is properly connected to both devices.

2. If the DisplayPort option is selectable but no signal appears on the screen,
    unplug the cable and plug it back in to allow the monitor to re-detect the
    connection.

3. If the issue persists, try connecting the monitor using HDMI to confirm that
    the monitor functions correctly, then attempt the DisplayPort connection again.

4. Ensure you have updated to the latest graphics card driver and motherboard
    BIOS version. If you cannot update the driver while connected via DisplayPort
    due to no signal, switch connections to HDMI if possible.

5. If possible, test the monitor with multiple devices using DisplayPort and verify
    that at least one device shows a signal. Trying different DisplayPort cables and
    cross-testing the cable with other devices may also help.

6. If the problem occurs suddenly after normal DisplayPort usage, use HDMI to
    ensure that DisplayPort is set to a resolution and refresh rate supported by the
    monitor.

If none of the above steps resolve the issue, the monitor may need inspection. Please contact our customer service team for further assistance.

To change the LOD settings for EC-A, FK, ZA,  EC-C, FK-C, ZA-C, S-C series, please follow the steps below:

Please disconnect the mouse first. Press and hold the following combination buttons together and re-connecting the mouse through USB.

• For a lower LOD: buttons 4 + 1

• For a medium LOD: buttons 5 + 1

• For a higher LOD: buttons 4 + 1 + 2

To check the battery power level, switch to  or  mode from the bottom of the mouse. Alternatively, charge the mouse. The power LED indicators on the mouse will light up and show the battery power level.

• For wired mouse

The DPI and the polling rate button is on the bottom of all ZOWIE wireless mouse models.

U2:

Press button 6 to switch DPI to your preference: 400/800/1000/1200/1600/3200

Press button 7 to switch the polling rate to your preference: 125Hz/500Hz/1000Hz

For EC-CW series, U2:

To change click response time settings, please follow the steps below:

Wireless mode: power off the mouse first. Press and hold the shown button and power button on the mouse at the same time. 

Wired mode: power off and disconnect the mouse first. Press and hold the indicated button and re-connect the mouse at the same time.

• Fast response time: 4
• Normal response time: 5

Monitors are passive devices and, therefore, require a graphics card to output compatible signals to enable Variable Refresh Rate (VRR) features. So the first step we would like to suggest is to check if your graphics card supports VRR technology (The name of VRR technology may vary from Adaptive-Sync, FreeSync to G-Sync).

For the Nvidia graphics card, please check it here

For AMD graphics card, please check it here

Second, check if your monitor features the VRR function.

Our models feature with VRR function below:

XL2730Z, XL2540, XL2546S, XL2731, XL2740, XL2746S, XL2540K, XL2540KE, XL2546K, XL2731K, XL2746K, XL2566K, XL2546X, XL2586X, XL2566X+, XL2546X+, XL2586X+.

How to enable FreeSync through graphics card settings

How to enable G-Sync via graphics card settings

On the monitor, please turn off DyAc / DyAc+ / DyAc 2  (if your monitor has that feature) through the monitor menu, since DyAc function is not compatible with variable fresh rate technology. Then, turn on the Adaptive-Sync/FreeSync Premium function through the monitor menu.

Learn more about Variable Refresh Rate (FreeSync Premium / G-Sync Compatible / Adaptive-Sync)

These cases happen in Valorant while players choose “Scaling by Display” in their graphics card control panel. Since the monitor is a passive device, it passively receives the signal output from a graphics card (which also needs to cooperate with the software). Compatibility issues from games and graphics might also cause the issue.

We have tested the other games like CS2 under the same resolutions, and refresh rate issues won’t happen. The good news is that we have some alternatives for you to solve this problem in Valorant. We suggest you try the following steps:

1. Update your graphic card drivers to the lastest version.

2. Run your graphic card control panel applications:

# For NVIDIA's graphic card:

A. Select "Adjust desktop size and position" under the "Display" section on the left taskbar.

B. Select "Perform scaling on:" by "GPU"

*Note: you can select a scaling mode like Aspect ratio / Full-screen / No scaling to adjust.